Call: 800-338-7268 , 401-781-7800
For A Durant specialist And Lowest Instant Prices

Feeding/Straightening Machines

Feeding/Straightening Machines The Durant FMDA and FHDA Feeding and Straightening Machines are ideal for feeding and removing coil curvature from material, prior to cut off applications. These machines include seven straightening rolls, two entrance rolls, two exit rolls and a drive with air clutch/brake and AC Motor. The machine feeds your material then stops when the material actuates a limit switch. Once the part is removed from the switch, the brake releases and your cycle begins again. Standard variable speed is 0-100 feet per minute. The machine is designed for cut-off type applications longer than 12" and should not be utilized for progressive die type jobs or where roll pressure is to be released.

ModelMax WidthMax ThicknessMin ThicknessPriceQuantity
VS-FMDA-66” (152 mm).145” (3.43 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-1010” (254 mm).130” (1.65 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-1515” (381 MM).110” (1.4 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-2020” (508 MM).090” (1.02 mm) .020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-2525” (635 mm).065” (3.43 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-3030” (762 mm).055” (1.65 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts
VS-FMDA-3636” (914 mm).040” (1.4 mm).020” (.51 mm)$CALL LOW PRICESQuantity Discounts

ModelMax WidthMax Material ThicknessMin ThicknessPriceQuantity
VS-FHDA-66” (152 mm).210” (5.33 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-1010” (254 mm).190” (4.83 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-1515” (381 MM).180” (4.57 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-2020” (508 MM).160” (4.06 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-2525” (635 mm).130 (3.3 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-3030” (762 mm).100” (2.54mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-3636” (914 mm).080” (2.03 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-4242” (1070 mm).060” (1.52 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts
VS-FHDA-4848” (1220 mm).040” (1.02 mm).025” (.64 mm)$CALL LOW PRICESQuantity Discounts

previous page next page

continue shopping
check out button

Product Category