Durant Precise Pneumatic Air Feeders

Selection
You can feed materials up to 12" wide, 12" stroke length, and material thickness to .250" thick or greater.

Versatility
Durant is built to see you through thick or thin, narrow or wide in metal, plastic or paper. Cost effective production always starts with Durant and ends at the bottom line.

Comparison
Put our Durant precise air feeder units beside any other comparative unit you have heard about. You will find our Durant precise air feeder to be the most Cost Effective, Accurate, Feeding machine availably.

Construction
Every model in the line is heavily, quality, manufactured to insure trouble free operation for the life of the Air Feeder.

Installation
Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy
Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.