Request a Quote

Call: 800-338-7268 , 401-781-7800
For A Durant specialist And Lowest Instant Prices

Premium Air Feeders

air feeders air feeders

Productivity Performers
To make sure your production facility can take advantage of the precision control and high speed effectiveness of the Durant Air Feed, we make 75 different models. If you are making something small in metal, plastic or paper, look to our A-50. This unit offers a 2" maximum width, a 2" maximum stroke, a .079" maximum thickness, and can operate at speeds up to 270 strokes per minute. Of course, that is just where things start out. Where they end up is the Maxi Model TK3 which handles width up to 24", with a maximum stroke of 12" , a maximum thickness of .100", and offers delivery capability of up to 40 units a minute. Every production need in between is covered. When you look at Durant, you will be looking at a number of special features you are not likely to find anywhere else. All units are built with extra thick wear plates, dual air cushions, hardened heavy duty guide rails, and hardened brass cylinder liners. To make your coil feeding even better, Durant Air Feeds come with a complete line of accessories. Each is designed to do its job perfectly ... each is designed to work perfectly with your Durant unit.

Unique Features Found on all Durant Models

  • Dual air cushions for durability, quiet operation, and the elimination of hammering.
  • Extra thick stainless wear plates on both main body and feeding body. Provides smoother faster operating rates, extended feed life, and enables the handling of unique wire and material configurations.
  • Hardened brass bushings inside the main feed body reduce wear and failure associated with other air feeds.
  • Oversized hardened guide rails.
  • Oversized air pistons and feed grippers.
  • Material support rollers.

Selection
Now you can feed materials from .002" to .200" thick. And widths as wide as 24". With 75 models available, Durant has a model just right for your application.

Versatility
Durant is built to see you through thick or thin, narrow or wide, flimsy or rigid, in metal, plastic or paper. Cost effective production always starts with Durant...and ends at the bottom line.

Comparison
Put our Durant Air Feed units beside any other comparative unit you have heard about. We won't need to say anything more.

Construction
Every model in the line from standard to maxi is heavily constructed and totally sealed to insure trouble free operation, even in the most hostile factory environments.

Installation
Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy
Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Productivity Performers
To make sure your production facility can take advantage of the precision control and high speed effectiveness of the Durant Air Feed, we make 75 different models. If you are making something small in metal, plastic or paper, look to our A-50. This unit offers a 2" maximum width, a 2" maximum stroke, a .079" maximum thickness, and can operate at speeds up to 270 strokes per minute. Of course, that is just where things start out. Where they end up is the Maxi Model TK3 which handles width up to 24" , with a maximum stroke of 12" , a maximum thickness of .100", and offers delivery capability of up to 40 units a minute. Every production need in between is covered. When you look at Durant, you will be looking at a number of special features you are not likely to find anywhere else. All units are built with extra thick wear plates, dual air cushions, hardened heavy duty guide rails, and hardened brass cylinder liners. To make your coil feeding even better, Durant Air Feeds come with a complete line of accessories. Each is designed to do its job perfectly ... each is designed to work perfectly with your Durant unit.

Selection

Now you can feed materials from .002" to .200" thick. And widths as wide as 24". With 75 models available, Durant has a model just right for your application.

Versatility

Durant is built to see you through thick or thin, narrow or wide, flimsy or rigid, in metal, plastic or paper. Cost effective production always starts with Durant...and ends at the bottom line.

Comparison

Put our Durant Air Feed units beside any other comparative unit you have heard about. We won't need to say anything more.

Construction

Every model in the line from standard to maxi is heavily constructed and totally sealed to insure trouble free operation, even in the most hostile factory environments.

Installation

Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy

Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Productivity Performers

To make sure your production facility can take advantage of the precision control and high speed effectiveness of the Durant Air Feed, we make 75 different models. If you are making something small in metal, plastic or paper, look to our A-50. This unit offers a 2" maximum width, a 2" maximum stroke, a .079" maximum thickness, and can operate at speeds up to 270 strokes per minute. Of course, that is just where things start out. Where they end up is the Maxi Model TK3 which handles width up to 24" , with a maximum stroke of 12" , a maximum thickness of .100", and offers delivery capability of up to 40 units a minute. Every production need in between is covered. When you look at Durant, you will be looking at a number of special features you are not likely to find anywhere else. All units are built with extra thick wear plates, dual air cushions, hardened heavy duty guide rails, and hardened brass cylinder liners. To make your coil feeding even better, Durant Air Feeds come with a complete line of accessories. Each is designed to do its job perfectly ... each is designed to work perfectly with your Durant unit.

A 50

  • Max. Width 2 (Inches) 50 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .079 (Inches) 1.98 (mm)
  • Max. Strokes Per Minute 280
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

A 100

  • Max. Width 2 (Inches) 50 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .075 (Inches) 1.88 (mm)
  • Max. Strokes Per Minute 200
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

A 150

  • Max. Width 2 (Inches) 50 (mm)
  • Max. Stroke 6 (Inches) 150 (mm)
  • Max. Thickness .067 (Inches) 1.68(mm)
  • Max. Strokes Per Minute 160
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

A 200

  • Max. Width 2 (Inches) 50 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .060 (Inches) 1.50(mm)
  • Max. Strokes Per Minute 130
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

A 250

  • Max. Width 2 (Inches) 50 (mm)
  • Max. Stroke 10 (Inches) 250 (mm)
  • Max. Thickness .047 (Inches) 1.18 (mm)
  • Max. Strokes Per Minute 110
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

B 50

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .079 (Inches) 1.98 (mm)
  • Max. Strokes Per Minute 260
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

B 100

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .071 (Inches) 1.78 (mm)
  • Max. Strokes Per Minute 190
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

B 150

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 6 (Inches) 150 (mm)
  • Max. Thickness .060 (Inches) 1.50 (mm)
  • Max. Strokes Per Minute 150
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

B 200

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .055 (Inches) 1.38 (mm)
  • Max. Strokes Per Minute 110
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

B 250

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 10(Inches) 250 (mm)
  • Max. Thickness .051 (Inches) 1.28 (mm)
  • Max. Strokes Per Minute 90
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

C 50

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .067 (Inches) 1.68(mm)
  • Max. Strokes Per Minute 210
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

C 100

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .062 (Inches) 1.55 (mm)
  • Max. Strokes Per Minute 160
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

C 150

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 6 (Inches) 150 (mm)
  • Max. Thickness .062 (Inches) 1.55 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

C 200

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .051 (Inches) 1.28 (mm)
  • Max. Strokes Per Minute 90
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

C 250

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 10(Inches) 250 (mm)
  • Max. Thickness .047 (Inches) 1.18 (mm)
  • Max. Strokes Per Minute 80
  • Pulling Capacity Pounds 53
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

BX 50

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .110 (Inches) 2.75 (mm)
  • Max. Strokes Per Minute 260
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

BX 100

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .106 (Inches) 2.65 (mm)
  • Max. Strokes Per Minute 180
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

BX 150

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 6 (Inches) 150 (mm)
  • Max. Thickness .094 (Inches) 2.35 (mm)
  • Max. Strokes Per Minute 150
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

BX 200

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .079 (Inches) 1.98 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

BX 250

  • Max. Width 3 (Inches) 75 (mm)
  • Max. Stroke 10 (Inches) 250 (mm)
  • Max. Thickness .079 (Inches) 1.98 (mm)
  • Max. Strokes Per Minute 90
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

CX 50

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .094 (Inches) 2.35 (mm)
  • Max. Strokes Per Minute 240
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

CX 100

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .083 (Inches) 2.08 (mm)
  • Max. Strokes Per Minute 170
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

CX 150

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 6 (Inches) 150 (mm)
  • Max. Thickness .071 (Inches) 1.78 (mm)
  • Max. Strokes Per Minute 140
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

CX 200

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .065 (Inches) 1.63 (mm)
  • Max. Strokes Per Minute 110
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

CX 250

  • Max. Width 4 (Inches) 100 (mm)
  • Max. Stroke 10 (Inches) 250 (mm)
  • Max. Thickness .065 (Inches) 1.63 (mm)
  • Max. Strokes Per Minute 90
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

DX 50

  • Max. Width 6 (Inches) 150 (mm)
  • Max. Stroke 2 (Inches) 50 (mm)
  • Max. Thickness .075 (Inches) 1.88 (mm)
  • Max. Strokes Per Minute 220
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

DX 100

  • Max. Width 6 (Inches) 150 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .075 (Inches) 1.88 (mm)
  • Max. Strokes Per Minute 160
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

DX 150

  • Max. Width 6 (Inches) 150 (mm)
  • Max. Stroke 6 (Inches) 200 (mm)
  • Max. Thickness .075 (Inches) 1.88 (mm)
  • Max. Strokes Per Minute 140
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

DX 200

  • Max. Width 6 (Inches) 150 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .065 (Inches) 1.63 (mm)
  • Max. Strokes Per Minute 110
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

DX 250

  • Max. Width 6 (Inches) 155 (mm)
  • Max. Stroke 10 (Inches) 250 (mm)
  • Max. Thickness .050 (Inches) 1.25 (mm)
  • Max. Strokes Per Minute 90
  • Pulling Capacity Pounds 100
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

P1

  • Max. Width 6 (Inches) 155 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .165 (Inches) 4.125 (mm)
  • Max. Strokes Per Minute 140
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

P2

  • Max. Width 6 (Inches) 155 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .165 (Inches) 4.125 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

P3

  • Max. Width 6 (Inches) 155 (mm)
  • Max. Stroke 12 (Inches) 300 (mm)
  • Max. Thickness .165 (Inches) 4.125 (mm)
  • Max. Strokes Per Minute 70
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

S1

  • Max. Width 8 (Inches) 205 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 140
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

S2

  • Max. Width 8 (Inches) 205 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

S3

  • Max. Width 8 (Inches) 205 (mm)
  • Max. Stroke 4 (Inches) 300 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 70
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Z1

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 4 (Inches) 100 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 140
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Z2

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 8 (Inches) 200 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Z3

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 12 (Inches) 300 (mm)
  • Max. Thickness .100 (Inches) 2.5 (mm)
  • Max. Strokes Per Minute 70
  • Pulling Capacity Pounds 238
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

V-1

  • Max. Width 18 (Inches) 457 (mm)
  • Max. Stroke 4 (Inches) 102 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 120
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

V-2

  • Max. Width 18 (Inches) 457 (mm)
  • Max. Stroke 8 (Inches) 204 (mm)
  • Max. Thickness .100 (Inches) 2.54 (mm)
  • Max. Strokes Per Minute 100
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

V-3

  • Max. Width 18 (Inches) 457 (mm)
  • Max. Stroke 12 (Inches) 305 (mm)
  • Max. Thickness .080 (Inches) 2.0 (mm)
  • Max. Strokes Per Minute 80
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

V-4

  • Max. Width 18 (Inches) 457 (mm)
  • Max. Stroke 16 (Inches) 406 (mm)
  • Max. Thickness .070 (Inches) 1.8 (mm)
  • Max. Strokes Per Minute 60
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

K-1

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 4 (Inches) 102 (mm)
  • Max. Thickness .100 (Inches) 2.54 (mm)
  • Max. Strokes Per Minute 110
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

K-2

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 8 (Inches) 204 (mm)
  • Max. Thickness .080 (Inches) 2.0 (mm)
  • Max. Strokes Per Minute 95
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

K-3

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 12 (Inches) 305 (mm)
  • Max. Thickness .070 (Inches) 1.8 (mm)
  • Max. Strokes Per Minute 75
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

K-4

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 16 (Inches) 406 (mm)
  • Max. Thickness .060 (Inches) 1.5 (mm)
  • Max. Strokes Per Minute 55
  • Pulling Capacity Pounds 475
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TZ-1

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 4 (Inches) 102 (mm)
  • Max. Thickness .200 (Inches) 5.0 (mm)
  • Max. Strokes Per Minute 115
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TZ-2

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 8 (Inches) 204 (mm)
  • Max. Thickness .180 (Inches) 4.6 (mm)
  • Max. Strokes Per Minute 80
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TZ-3

  • Max. Width 12 (Inches) 305 (mm)
  • Max. Stroke 12 (Inches) 305 (mm)
  • Max. Thickness .160 (Inches) 4.0 (mm
  • Max. Strokes Per Minute 60
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TK-1

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 4 (Inches) 102 (mm)
  • Max. Thickness .140 (Inches) 3.5 (mm)
  • Max. Strokes Per Minute 80
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TK-2

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 8 (Inches) 204 (mm)
  • Max. Thickness .120 (Inches) 3.0 (mm)
  • Max. Strokes Per Minute 75
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

TK-3

  • Max. Width 24 (Inches) 610 (mm)
  • Max. Stroke 12 (Inches) 305 (mm)
  • Max. Thickness .100 (Inches) 2.54 (mm)
  • Max. Strokes Per Minute 40
  • Pulling Capacity Pounds 710
  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

ModelMax. WidthMax. StrokeMax. ThicknessMax. Strokes Per MinutePulling Capacity PoundsPriceQuantity
A 502 (Inches) 50 (mm)2 (Inches) 50 (mm).079 (Inches) 1.98 (mm)28053$CALL LOW PRICESQuantity Discounts
A 1002 (Inches) 50 (mm)4 (Inches) 100 (mm).075 (Inches) 1.88 (mm)20053$CALL LOW PRICESQuantity Discounts
A 1502 (Inches) 50 (mm)6 (Inches) 150 (mm).067 (Inches) 1.68(mm)16053$CALL LOW PRICESQuantity Discounts
A 2002 (Inches) 50 (mm)8 (Inches) 200 (mm).060 (Inches) 1.50(mm)13053$CALL LOW PRICESQuantity Discounts
A 2502 (Inches) 50 (mm)10 (Inches) 250 (mm).047 (Inches) 1.18 (mm)11053$CALL LOW PRICESQuantity Discounts
B 503 (Inches) 75 (mm)2 (Inches) 50 (mm).079 (Inches) 1.98 (mm)26053$CALL LOW PRICESQuantity Discounts
B 1003 (Inches) 75 (mm)4 (Inches) 100 (mm).071 (Inches) 1.78 (mm)19053$CALL LOW PRICESQuantity Discounts
B 1503 (Inches) 75 (mm)6 (Inches) 150 (mm).060 (Inches) 1.50 (mm)15053$CALL LOW PRICESQuantity Discounts
B 2003 (Inches) 75 (mm)8 (Inches) 200 (mm).055 (Inches) 1.38 (mm)11053$CALL LOW PRICESQuantity Discounts
B 2503 (Inches) 75 (mm)10(Inches) 250 (mm).051 (Inches) 1.28 (mm)9053$CALL LOW PRICESQuantity Discounts
C 504 (Inches) 100 (mm)2 (Inches) 50 (mm).067 (Inches) 1.68(mm)21053$CALL LOW PRICESQuantity Discounts
C 1004 (Inches) 100 (mm)4 (Inches) 100 (mm).062 (Inches) 1.55 (mm)16053$CALL LOW PRICESQuantity Discounts
C 1504 (Inches) 100 (mm)6 (Inches) 150 (mm).062 (Inches) 1.55 (mm)12053$CALL LOW PRICESQuantity Discounts
C 2004 (Inches) 100 (mm)8 (Inches) 200 (mm).051 (Inches) 1.28 (mm)9053$CALL LOW PRICESQuantity Discounts
C 2504 (Inches) 100 (mm)10(Inches) 250 (mm).047 (Inches) 1.18 (mm)8053$CALL LOW PRICESQuantity Discounts
BX 503 (Inches) 75 (mm)2 (Inches) 50 (mm).110 (Inches) 2.75 (mm)260100$CALL LOW PRICESQuantity Discounts
BX 1003 (Inches) 75 (mm)4 (Inches) 100 (mm).106 (Inches) 2.65 (mm)180100$CALL LOW PRICESQuantity Discounts
BX 1503 (Inches) 75 (mm)6 (Inches) 150 (mm).094 (Inches) 2.35 (mm)150100$CALL LOW PRICESQuantity Discounts
BX 2003 (Inches) 75 (mm)8 (Inches) 200 (mm).079 (Inches) 1.98 (mm)120100$CALL LOW PRICESQuantity Discounts
BX 2503 (Inches) 75 (mm)10 (Inches) 250 (mm).079 (Inches) 1.98 (mm)90100$CALL LOW PRICESQuantity Discounts
CX 504 (Inches) 100 (mm)2 (Inches) 50 (mm).094 (Inches) 2.35 (mm)240100$CALL LOW PRICESQuantity Discounts
CX 1004 (Inches) 100 (mm)4 (Inches) 100 (mm).083 (Inches) 2.08 (mm)170100$CALL LOW PRICESQuantity Discounts
CX 1504 (Inches) 100 (mm)6 (Inches) 150 (mm).071 (Inches) 1.78 (mm)140100$CALL LOW PRICESQuantity Discounts
CX 2004 (Inches) 100 (mm)8 (Inches) 200 (mm).065 (Inches) 1.63 (mm)110100$CALL LOW PRICESQuantity Discounts
CX 2504 (Inches) 100 (mm)10 (Inches) 250 (mm).065 (Inches) 1.63 (mm)90100$CALL LOW PRICESQuantity Discounts
DX 506 (Inches) 150 (mm)2 (Inches) 50 (mm).075 (Inches) 1.88 (mm)220100$CALL LOW PRICESQuantity Discounts
DX 1006 (Inches) 150 (mm)4 (Inches) 100 (mm).075 (Inches) 1.88 (mm)160100$CALL LOW PRICESQuantity Discounts
DX 1506 (Inches) 150 (mm)6 (Inches) 200 (mm).075 (Inches) 1.88 (mm)140100$CALL LOW PRICESQuantity Discounts
DX 2006 (Inches) 150 (mm)8 (Inches) 200 (mm).065 (Inches) 1.63 (mm)110100$CALL LOW PRICESQuantity Discounts
DX 2506 (Inches) 155 (mm)10 (Inches) 250 (mm).050 (Inches) 1.25 (mm)90100$CALL LOW PRICESQuantity Discounts
P16 (Inches) 155 (mm)4 (Inches) 100 (mm).165 (Inches) 4.125 (mm)140238$CALL LOW PRICESQuantity Discounts
P26 (Inches) 155 (mm)8 (Inches) 200 (mm).165 (Inches) 4.125 (mm)120238$CALL LOW PRICESQuantity Discounts
P36 (Inches) 155 (mm)12 (Inches) 300 (mm).165 (Inches) 4.125 (mm)70238$CALL LOW PRICESQuantity Discounts
S18 (Inches) 205 (mm)4 (Inches) 100 (mm).120 (Inches) 3.0 (mm)140238$CALL LOW PRICESQuantity Discounts
S28 (Inches) 205 (mm)8 (Inches) 200 (mm).120 (Inches) 3.0 (mm)120238$CALL LOW PRICESQuantity Discounts
S38 (Inches) 205 (mm)4 (Inches) 300 (mm).120 (Inches) 3.0 (mm)70238$CALL LOW PRICESQuantity Discounts
Z112 (Inches) 305 (mm)4 (Inches) 100 (mm).120 (Inches) 3.0 (mm)140238$CALL LOW PRICESQuantity Discounts
Z212 (Inches) 305 (mm)8 (Inches) 200 (mm).120 (Inches) 3.0 (mm)120238$CALL LOW PRICESQuantity Discounts
Z312 (Inches) 305 (mm)12 (Inches) 300 (mm).100 (Inches) 2.5 (mm)70238$CALL LOW PRICESQuantity Discounts
V-118 (Inches) 457 (mm)4 (Inches) 102 (mm).120 (Inches) 3.0 (mm)120475$CALL LOW PRICESQuantity Discounts
V-218 (Inches) 457 (mm)8 (Inches) 204 (mm).100 (Inches) 2.54 (mm)100475$CALL LOW PRICESQuantity Discounts
V-318 (Inches) 457 (mm)12 (Inches) 305 (mm).080 (Inches) 2.0 (mm) 80475$CALL LOW PRICESQuantity Discounts
V-418 (Inches) 457 (mm)16 (Inches) 406 (mm) .070 (Inches) 1.8 (mm) 60475$CALL LOW PRICESQuantity Discounts
K-124 (Inches) 610 (mm) 4 (Inches) 102 (mm) .100 (Inches) 2.54 (mm)110475$CALL LOW PRICESQuantity Discounts
K-224 (Inches) 610 (mm)8 (Inches) 204 (mm).080 (Inches) 2.0 (mm)95475$CALL LOW PRICESQuantity Discounts
K-324 (Inches) 610 (mm)12 (Inches) 305 (mm).070 (Inches) 1.8 (mm)75475$CALL LOW PRICESQuantity Discounts
K-424 (Inches) 610 (mm)16 (Inches) 406 (mm).060 (Inches) 1.5 (mm)55475$CALL LOW PRICESQuantity Discounts
TZ-112 (Inches) 305 (mm) 4 (Inches) 102 (mm).200 (Inches) 5.0 (mm)115710$CALL LOW PRICESQuantity Discounts
TZ-212 (Inches) 305 (mm)8 (Inches) 204 (mm).180 (Inches) 4.6 (mm)80710$CALL LOW PRICESQuantity Discounts
TZ-312 (Inches) 305 (mm)12 (Inches) 305 (mm).160 (Inches) 4.0 (mm60710$CALL LOW PRICESQuantity Discounts
TK-124 (Inches) 610 (mm)4 (Inches) 102 (mm).140 (Inches) 3.5 (mm)80710$CALL LOW PRICESQuantity Discounts
TK-224 (Inches) 610 (mm)8 (Inches) 204 (mm).120 (Inches) 3.0 (mm)75710$CALL LOW PRICESQuantity Discounts
TK-324 (Inches) 610 (mm)12 (Inches) 305 (mm).100 (Inches) 2.54 (mm)40710$CALL LOW PRICESQuantity Discounts

Air Feed Options


ModelPriceQuantity
Pilot Release ABC$CALL LOW PRICESQuantity Discounts
Electric Actuation ABC$CALL LOW PRICESQuantity Discounts
Safety Guard ABC$CALL LOW PRICESQuantity Discounts
Pilot Release Other$CALL LOW PRICESQuantity Discounts
Electric Actuation Other$CALL LOW PRICESQuantity Discounts
Safety Guard Other$CALL LOW PRICESQuantity Discounts

Pilot Release ABC

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Electric Actuation ABC

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Safety Guard ABC

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Pilot Release Other

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Electric Actuation Other

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

Safety Guard Other

  • Price CALL LOW PRICES
  • Quantity Quantity Discounts
  • addtocart

previous pageprevious page next pagenext page

check out button

Product Category