Durant Precise Pneumatic Air Feeders

air feeders, pneumatic air feeder, rapid air feeders manufactures

MECHANICAL PLUNGER ACTUATION

ELECTRICAL ACTUATION

Precise Pneumatic,mechanical plunger actuation, air feeder manufacturers

Precise Productivity Performers
Durant provides the most cost effective precise pneumatic air feeders for your production requirements. Thirteen models are offered in material widths up to 12", maximum stroke length of 12", and steel thickness .100" maximum. Greater thickness may be used when feeding materials other than steel.

All Durant precise model air feeders include a (3) Year Warranty and Free "0" Ring Repair for the life on the air feeder. No confusing paperwork is required. Simply return the air feeder to Durant and we will repair the feeder at no charge to you.

Durant is not satisfied until you, our customer, is satisfied!

Each Durant precise air feeder is designed and manufactured to insure your feeding production runs smoothly.

Selection
You can feed materials up to 12" wide, 12" stroke length, and material thickness to .250" thick or greater.

Versatility
Durant is built to see you through thick or thin, narrow or wide in metal, plastic or paper. Cost effective production always starts with Durant and ends at the bottom line.

Comparison
Put our Durant precise air feeder units beside any other comparative unit you have heard about. You will find our Durant precise air feeder to be the most Cost Effective, Accurate, Feeding machine available.

Construction
Every model in the line is heavily, quality, manufactured to insure trouble free operation for the life of the Air Feeder.

Installation
Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy
Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Selection

You can feed materials up to 12" wide, 12" stroke length, and material thickness to .250" thick or greater.

Versatility

Durant is built to see you through thick or thin, narrow or wide in metal, plastic or paper. Cost effective production always starts with Durant and ends at the bottom line.

Comparison

Put our Durant precise air feeder units beside any other comparative unit you have heard about. You will find our Durant precise air feeder to be the most Cost Effective, Accurate, Feeding machine available.

Construction

Every model in the line is heavily, quality, manufactured to insure trouble free operation for the life of the Air Feeder.

Installation

Installation is a snap with Durant. Simply insert two bolts through mounting holes (standard air feed spacing), and bolt it to the press table or bolster plate. Next, fix a striker to the press ram and connect the air supply, (75 to 120 PSI). The second the striker is touched by the actuator on the feed, the feed goes into action. The feed length can be altered at any time by simply adjusting the stop on the air feed.

Accuracy

Our sophisticated series of controls enables Durant to achieve accuracy of 0.001" for a couple of reasons. First of all, the feed material is always in the solid grip of either the feed clamp or the holding clamp so it cannot slip or misfeed. Secondly, even if it is maladjusted, the special shock absorbing air cushions at each end of the stroke prevent bounce.

Are Air Feed Replacement Parts Costing You $$$ and production time! Call Durant. We have the solution to you problems!

AF 12

Max. Width 1.5"
Max. Stroke 2"
Max. Thickness .040"
Max. Strokes Per Minute 220
Pulling Capacity Pounds 37
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 16

Max. Width 1.5"
Max. Stroke 6"
Max. Thickness .040"
Max. Strokes Per Minute 60
Pulling Capacity Pounds 37
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 22

Max. Width 2.5"
Max. Stroke 2.5"
Max. Thickness .048"
Max. Strokes Per Minute 200
Pulling Capacity Pounds 72
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 28

Max. Width 2.5"
Max. Stroke 8"
Max. Thickness .040"
Max. Strokes Per Minute 50
Pulling Capacity Pounds 72
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 44

Max. Width 4"
Max. Stroke 4"
Max. Thickness .092"
Max. Strokes Per Minute 165
Pulling Capacity Pounds 103
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 412

Max. Width 4"
Max. Stroke 12"
Max. Thickness .056"
Max. Strokes Per Minute 50
Pulling Capacity Pounds 138
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 66

Max. Width 6"
Max. Stroke 6"
Max. Thickness .092"
Max. Strokes Per Minute 120
Pulling Capacity Pounds 138
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 612

Max. Width 6"
Max. Stroke 12"
Max. Thickness .072"
Max. Strokes Per Minute 45
Pulling Capacity Pounds 175
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 88

Max. Width 8"
Max. Stroke 8"
Max. Thickness .092"
Max. Strokes Per Minute 100
Pulling Capacity Pounds 277
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 106

Max. Width 10"
Max. Stroke 6"
Max. Thickness .092"
Max. Strokes Per Minute 110
Pulling Capacity Pounds 277
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 1010

Max. Width 10"
Max. Stroke 10"
Max. Thickness .100"
Max. Strokes Per Minute 65
Pulling Capacity Pounds 351
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 126

Max. Width 12"
Max. Stroke 6"
Max. Thickness .100"
Max. Strokes Per Minute 90
Pulling Capacity Pounds 351
Price CALL LOW PRICES
Quantity Quantity Discounts

AF 1212

Max. Width 12"
Max. Stroke 12"
Max. Thickness .100"
Max. Strokes Per Minute 50
Pulling Capacity Pounds 351
Price CALL LOW PRICES
Quantity Quantity Discounts

Model	Max. Width	Max. Stroke	Max. Thickness	Max. Strokes Per Minute	Pulling Capacity Pounds	Price	Quantity
AF 12	1.5"	2"	.040"	220	37	$CALL LOW PRICES	Quantity Discounts
AF 16	1.5"	6"	.040"	60	37	$CALL LOW PRICES	Quantity Discounts
AF 22	2.5"	2.5"	.048"	200	72	$CALL LOW PRICES	Quantity Discounts
AF 28	2.5"	8"	.040"	50	72	$CALL LOW PRICES	Quantity Discounts
AF 44	4"	4"	.092"	165	103	$CALL LOW PRICES	Quantity Discounts
AF 412	4"	12"	.056"	50	138	$CALL LOW PRICES	Quantity Discounts
AF 66	6"	6"	.092"	120	138	$CALL LOW PRICES	Quantity Discounts
AF 612	6"	12"	.072"	45	175	$CALL LOW PRICES	Quantity Discounts
AF 88	8"	8"	.092"	100	277	$CALL LOW PRICES	Quantity Discounts
AF 106	10"	6"	.092"	110	277	$CALL LOW PRICES	Quantity Discounts
AF 1010	10"	10"	.100"	65	351	$CALL LOW PRICES	Quantity Discounts
AF 126	12"	6"	.100"	90	351	$CALL LOW PRICES	Quantity Discounts
AF 1212	12"	12"	.100"	50	351	$CALL LOW PRICES	Quantity Discounts

Durant Precise Pneumatic Air Feed Options

Model	Price	Quantity
Pilot Release	$CALL LOW PRICES	Quantity Discounts
Electrical Actuation	$CALL LOW PRICES	Quantity Discounts

Pilot Release

Price CALL LOW PRICES
Quantity Quantity Discounts

Electrical Actuation

Price CALL LOW PRICES
Quantity Quantity Discounts

previous page next page

continue shopping

Request a Quote